Improper maintenance will shorten the service life of the Cheapest Anilox roller For sale, and worse, it will lead to the damage of the anilox roll and cannot be used normally, so we need to understand the correct use of the Cheapest Anilox roller For sale and some bad phenomena caused:

Ultrasonic cleaning of the Cheapest Anilox roller For sale is to immerse the anilox roll in the groove of the ultrasonic cleaning device of chemical cleaning solution. The frequency conversion device in the groove sends out high-frequency sound waves to vibrate the solution and produce bubbles and impact force, so as to achieve the purpose of cleaning. If the Cheapest Anilox roller For sale is cleaned in high-frequency ultrasonic vibration for a long time, the ceramics on the surface of the Cheapest Anilox roller products are easy to be damaged and form a "groove" phenomenon. It is necessary to grasp an appropriate cleaning time. In addition, if you are not careful during the disassembly and installation of the Cheapest Anilox roller For sale, it is also easy to scratch the surface of the the Anilox roller and produce a "groove" phenomenon. Therefore, it is necessary to carefully maintain and maintain the the Cheapest Anilox roller For sale, and operate carefully when disassembling and installing the the Cheapest Anilox roller For sale. All unused anilox rolls should be placed on the shelf to prevent deformation. For the Cheapest Anilox roller For sale that are not used for a long time, it is best to cover the roll body with a sheath to protect it. When the anilox roller is sent to other places for processing, it is more important to pay attention to the packaging to prevent it from being violently vibrated or worn, and to avoid the occurrence of deformation.

The scraper is a vulnerable part. After a certain service time, the scraper will inevitably produce wear, making its working surface uneven, and it is easy to scrape the longitudinal part of the the Cheapest Anilox roller For sale into "grooves". In addition, if the scraper device is loose and vibrated, it is easy to aggravate the wear between it and the anilox roller, and the friction between it and the Cheapest Anilox roller For sale. Therefore, the worn scraper should be processed and polished in time. If the scraper is loose, corresponding technical measures should be taken to eliminate it to ensure its normal use. When using the scraper, you should also pay attention to adjusting it parallel to the contact surface of the Cheapest Anilox roller For sale, and the pressure should be adjusted as light as possible. As long as you can scrape off the excess ink on the surface of the Cheapest Anilox roller For sale, the angle between it and the anilox roller should also be adjusted well, so as to effectively reduce the chance of wearing the anilox roller to produce "grooves".