Shape and characteristics of ink holes on the surface of anilox roller products

The number of lines of anilox roller products refers to the number of inking holes per unit length on the surface of anilox roller. Thus, to find the number of lines in anilox roller a specific number of the number of lines of anilox roller is needed.This refers to the ability to produce a continuous, uniform stroke of line with a consistent number of inking holes per unit length. For example, a 0.5 inch wide roller is expected to have approximately 0.5 in (2.4 mm) of line per unit length. Although there is an exception for high-quality anilox roller, many materials such as glass, porcelain or bronze are typically not made to produce the required line thickness and have smaller inking holes per unit length. On the flip side, because the angle between the roller and the surface is increased, the inking hole is not as close to parallel with it (resulting in a smaller arc for the line). Note that it is not appropriate to use numbers specific for each surface of an existing or a future version of a particular roller.The use of anilox roller as the only surface on which a specific number of lines to be placed are placed makes it very easy to place the lines. In other words it is very convenient to be able to simply place lines on a surface or on a roller. The thickness of the lines can be controlled very precisely, hence the line's length is also easy to determine. Also, the diameter of the lines can be controlled as well. The size of the lines will also be able to be controlled, but there are other advantages as well.

Several common inking hole shapes and characteristics of anilox roller products surfaces:The base plane is sharp.Lines are usually straight.The area around the edge is flat.Edge contrast is usually strong.Lines are sharp.The top of a hole is usually sharp.The top of a hole is usually straight.The design pattern can be explained in four rules. The first rule is that edges are sharp and faces are clean, straight and flat:"The more an edge is 'sharply' to the sides of the holes, the nicer it is to do holes in the form "The second rule is that lines, edges, and faces are always clean and sharp.

Anilox roller products mainly includes chrome plated anilox roll and ceramic anilox roller.The anilox roller, unlike the roller bearing, has an apron with the surface area of the bearings slightly larger than those of the roller bearing. This improves the bearing life and prevents the surface from scratching. The diameter at the surface of the apron varies with the type of anilox roller. Generally, the anilox roller has a diameter between about 6 mm and more than 12 mm.